Maricer Products Page 1

Next Products Page >>

MPL/MPM - Pontoon Light & Pontoon Marker

Pontoon illumination and identification can be provided by means of this bollard. The units incorporate a 6A MCB and P12R photocell controlling 2D16 lamp control gear located within a 3mm opal polycarbonate diffuser.

Dimensions
H 600mm		D 220mm		W 210mm

UM2I/UM4I
Non-Metered Option

Two or Four Way Bollards without the metering option. The switchgear is housed beneath weatherproof polycarbonate reset flaps which have a locking facility. The standard Residual Current Device arrangement is to provide one device for a two way unit and two for a four way. Alternative options are available upon request.

Dimensions
H 840mm		D 220mm		W 210mm

DM2I/DM4I Metered Option

Two or Four Way Bollards with the metering option. A range of meters can be supplied from the 100A rated Ofgem Approved meter primarily used in the two way unit to the din rail mounted single module 32A rated version utilised in the four way unit. Computerised metering and energy control can also be provided and an alternative brochure covering this option is available upon request. Illumination is provided by means of 2D 16 control gear and lamp along with a 6A Single Pole MCB and P12R Photocell.

Dimensions
H 840mm		D 220mm		W 210mm

MEC2 Card Meters

Card Meters are one option for the marina operator to recover money for electricity consumed in ‘pre-pay’ rather than credit format. The reconditioned Card Meters are accessed through customer reset flaps. A card is purchased with a pre-determined value loaded onto it which, when inserted into the meter, loads that value onto the meter. The meter then counts down the pre-loaded value until it is consumed. An emergency credit value of £1.00 is available on each meter. Alterations to the tariff / emergency credit value can be made by the use of a Meterman card.

Dimensions
H 840mm		D 220mm		W 210mm

RD2 Metered Module

This compact metered module is designed for use with the UM/DM/MEC range of bollards to offer a remote metering facility. The control devices for the RD2 are contained in the master supply bollard (UM, DM or MEC) and cable from that will supply the sockets on the RD2. This unit would generally be sited opposite the master unit.

Dimensions
H 600mm		D 220mm		W 210mm

Next Products Page >>